GM Small Block Compatible 327 c.i. Engine – 350 Horsepower – Deluxe Dressed – Polished Pulley Kit – Fuel Injected

Description

Overview:

Blueprints BP327CTFKV GM Small Block Compatible performance crate engines are dyno tested at our factory with a Holley Sniper II EFI System. This produces 350 horsepower and 350 ft. lbs. torque. This engine comes as a deluxe dressed engine that comes with: Premium Vintage Valve Covers, Premium Vintage Air Cleaner as well as the Fuel Pump and Feed lines. Makes this engine a great drop in for performance. Comes with a Polished Pulley Kit.

Description:

• Horsepower & Torque: 350 Horsepower / 350 ft. lbs. Torque
• Compression Ratio: 9.4:1
• BluePrint Engines Aluminum Heads
• BluePrint Engines Hydraulic Roller Cam
• BluePrint Engines Forged Crank
• BluePrint Engines Hypereutectic Pistons

Block:

• BluePrint Engines High Strength Cast Iron Block
• Drilled and Tapped for Clutch Linkage
• Mech Fuel Pump Provision: Yes
• Passenger Side Dipstick
• 1-Piece Rear Main Seal
• 4-Bolt Main
• 4.000″ Bore

Rotating Assembly:

• BluePrint Forged Crankshaft
• 3.250″ Stroke
• Forged 5.700″ Connecting Rods w/ 150,000 PSI Bolts
• Hypereutectic Pistons
• Internally Balanced Front – Externally Balanced Rear 

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads – H8002K
• 64cc Chamber
• 2.02″ Intake / 1.60″ Exhaust Valves
• 195cc Intake / 75cc Exhaust Runners

Cam Specs:

• Hydraulic Roller
• .495 Intake / .502 Exhaust Lift
• 220 Intake / 224 Exhaust Duration
• @ .050-114 Degree Lobe Separation

Ignition Timing:

• 32-34 Degrees Total at 3500 RPM

Also Includes:

• Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump 
• Under Header Spark Plug Wires (Perfect for Rams Horn exhaust manifolds)
• BluePrint Tach Drive Pro Billet Ready Run Distributor – BPP3503TDBK
• Holley Sniper 2 EFI System – BPP550-510-3XX
• Aluminum Intake Manifold – BPP350VINT
• Thermostat Housing – BPP10108470
• Premium Vintage Valve Covers
• Premium Vintage Air Cleaner
• 6.75-inch Harmonic Balancer
• Thermostat – BPP180TS
• Timing Cover
• Spark Plugs
• Oil Pan

Notes:

• Not for use in pollution-controlled vehicles.
• The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.

Related Products

• 50 State Legal Replacement 1970-1990 – GM Big Block Compatible 454 c.i. Engine – Long Block
• Aluminum Assembled Cylinder Head – Pedestal Mount – Ford SB Compatible – 190cc
• Aluminum Assembled Cylinder Head – GM SB Compatible – 220cc

Browse more in Crate Engines.