Ford Small Block Compatible 347 c.i. Engine and 4R70W Automatic Transmission – 415 Horsepower – Standard Edition Builder Series – Polished Pulley Kit – Carbureted

Description: 

• Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque
• Compression Ratio: 10.0:1
• BluePrint Engines Aluminum Heads
• BluePrint Engines Hydraulic Roller Cam
• BluePrint Forged Pistons
• BluePrint Engines Cast Crank

Block:

• BluePrint Engines High Strength Cast Iron Block
• Increased Deck Thickness & Strength Webbing
• Improved Water Jacket Design
• 1-Piece Rear Main Seal
• Priority Main Oiling
• 4.000″ Bore
• 4-Bolt Main

Rotating Assembly:

• Cast Crank
• 3.400″ Stroke
• Forged 5.400″ Connecting Rods
• Forged Pistons
• 28oz Externally Balanced Front and Rear

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads – HP9009
• 60cc Chamber
• 2.02″ Intake / 1.60″ Exhaust Valves
• 190cc Intake / 60cc Exhaust Runners

Cam Specs:

• Hydraulic Roller Cam
• .543 Intake / .554 Exhaust Lift
• 218 Intake / 226 Exhaust Duration
• @.050-112 Degree Lobe Separation

Ignition Timing:

• 34 Degrees Total at 3500 RPM

Also Includes:

• Front Accessory Drive with A/C Compressor, Power Steering Pump, Alternator, and Water Pump
• Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke – BPP080457SA
• Dual Plane Satin Aluminum Intake Manifold – BPP302INT
• Thermostat and Thermostat Housing
• Pro Billet Distributor – BPP3023BK
• Ignition Coil – BPP82021BK
• Mustang Style Valve covers
• Harmonic Balancer
• Electric Fuel Pump
• 7 Quart Oil Pan
• Air Cleaner

Assembled with Complete 4R70W Automatic Transmission Package:

• Includes Electronic Transmission Controller
• Transmission Built to 650 HP
• 2200-2600 Stall Torque Converter
• Flex Plate
• Starter
• 4 Speed, Overdrive Transmission w/Lockup
• GEAR RATIOS
• First: 2.84 :1.
• Second: 1.55 :1.
• Third: 1.00 :1.
• Overdrive: 0.70 :1.
• Reverse: 2.32 :1.

Notes:

• Does not include TPS, as varies with carb or EFI type. 
• The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
• Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc. 
• Package Ships assembled as pictured. 
• IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM